Celtic Seax Cleaver-Machete – 16-Inch Hand-Forged Norse-Engraved Chopper with Valknut & Celtic Knotwork

Celtic Seax Cleaver-Machete — 16-Inch Hand-Forged Engraved Chopper with Celtic Knotwork & a Valknut

This is a hand-forged Celtic seax cleaver — a 16-inch wide chopping machete forged in Nepal from reclaimed 5160 leaf-spring steel, full-tang and water-tempered, with Celtic knotwork and Norse symbols engraved down the blade. It is the decorated workhorse of our cleaver line: a serious chopper carrying a Valknut, a Norse roundel and a band of Celtic knots, finished bright so the engraving reads.

Drawing on the big seaxes carried by Norse and Celtic warriors, this is a cleaver-machete reimagined as a heritage piece. The wide forward belly gives it real chopping and slashing power for outdoor work, while the engraved Celtic knotwork, the three-triangle Valknut, the circular Norse symbol and the chevrons along the blade turn a working tool into something with presence on the wall.

Under the decoration it is genuine 5160 with a water-tempered edge on a 6-inch full-tang rosewood handle — sharpened, balanced and ready to work. It is the cleaver to choose when you want the chopping power of a machete and the look of a Norse-Celtic heirloom in one blade.

Backed by a verified customer review.

Honest note: this is an original Everest Forge design, a fusion of fantasy, function and history. The Celtic knotwork and Norse symbols are decorative motifs inspired by that heritage rather than a copy of one specific historical artifact. It is live steel — sharp, full-tang and functional — built for real chopping, clearing, collection and display, but not for contact LARP or edge-on-edge sparring.

Engraved, and Built to Chop

What sets this cleaver apart is the artwork on a genuinely hard-working blade. A band of Celtic knotwork runs down the blade, anchored by a Valknut and a circular Norse symbol near the bolster and chevrons toward the tip — the kind of detailing that usually lives on display-only pieces, here put on a 16-inch chopper that can actually clear brush and split wood. It is offered in satin or polished/mirror finish so the engraving stands out; a brighter blade shows the knotwork best.

Specifications

All measurements are approximate and may vary slightly due to the handcrafted nature of each blade.

Customise Your Cleaver

Who This Blade Is For

• Collectors who want an engraved, Norse-Celtic chopper as a centrepiece
• Reenactors and Viking and Celtic enthusiasts who want a decorated working blade
• Outdoors users who want chopping power with standout looks
• Gift buyers after a striking, personalised hand-forged cleaver
• Anyone who wants display presence with a real working edge underneath

How Ordering Works

What's Included

• One hand-forged Celtic Seax Cleaver-Machete in your chosen specification
• Leather-wrapped wooden scabbard in your chosen colour
• Any personalisation or engraving you requested

Shipping, Returns & Warranty

Every blade ships tracked and insured by DHL or FedEx with secure, encrypted checkout, and is covered by our full refund-or-replacement promise. Edged-blade import rules vary by country, so please check your local regulations before ordering. Because each cleaver is forged and engraved to order by hand, allow time for crafting before dispatch.

Caring for Your High-Carbon Cleaver

5160 is a high-carbon steel and will surface-rust if neglected. Keep the blade dry, wipe it down after use, and apply a thin coat of protective oil before storage — taking care to keep the engraved areas clean and lightly oiled. For long-term storage, keep it out of the scabbard so the edge stays dry.

Celtic Seax Cleaver — Frequently Asked Questions